• Scan Profibus I/O (DP master)
• Emulate Profibus I/O (DP slave)

• Supports all standard Profibus baud rates (up to 12 Mbaud)
• Simultaneous operation of Profibus DP Master, DP Slave and FDL protocols
• Extremely fast scan rate for a DP Master, 6000 I/O in 1 ms!

Reliance AutoMax Configuration
Sample Reliance AutoMax basic software setup and configuration is included with the SST Profibus module.

• 24 Mhz Intel i960 RISC processor with 512 Kbytes of 32-bit local RAM
• 256 Kbytes shared 16-bit RAM, accessible from the host as 256 Kbytes or in 16 Kbyte pages
• 512 Kbytes sectored flash memory for storage of card firmware and configuration data
  -Run firmware from flash
  -Store network parameters, DP master or DP slave configurations in flash
  
• Siemens ASPC2 LAN controller for Profibus functions
• Standard Profibus 9-pin D-connector to connect to Profibus bus connector
• 5-pin Phoenix connector
  -Built-in termination can be added by making connections on the Phoenix connector
  -Internally connected to 9-pin connector
• Serial port for downloading software modules and configuration data
  -Don't need to download from the host computer
  -Can program modules and configurations into flash from the serial port
  
• Supports baud rates from 9.6 Kbaud to 12 Mbaud
• Hardware watchdog
• Optional host watchdog to shut down operation if host application fails
• Power requirements: 0 to 50C (32 to 122篎)
• Storage requirements: -25 to 70C (-13 to 158篎)
• Diagnostic LED gives instantaneous status of network errors, DP master, DP slave and FDL