Applications
Many third party software programs support the SST DeviceNet interface card for various applications including:

• Operator Interface and MMI PC Control
• Network Configuration, Troubleshooting and Diagnostics
• I/O Emulation
• Device Development

Features

• Entire DeviceNet Protocol is executed in hardware
• UCMMcapable, Group 1, 2, and 3 dynamic explicit connections supported
• Simultaneous execution of Group 2 Client and Server operation
• All DeviceNet standard baud rates supported: 125, 250, and 500 Kbaud
• Full DeviceNet implementation with Change of State and explicit messaging
• DeviceNet compliance at the card level for I/O scanner and device applications

CustomDriver Development
SST offers two options for supporting the DeviceNet interface card: SST Common Driver Architecture (CDA) or Memory Mapped Access. The SST CDA significantly reduces software driver development time without compromising any of SST hardware specific features. The CDA supports SST ControlNet, DeviceNet, Modicon and Profibus interface cards. Memory Mapped Access is also available. SST provides an open documented memory map interface with example drivers.

Available with the SST DeviceNet Pro PCI Card

• DeviceNet Network Analyzer and Monitor
• Diagnostic Software Tools
• DeviceNet Node Commissioning Tool
• OPC Server
• Common Driver Architecture (CDA)
• Custom driver development software
• Microsoft Windows 95/98/NT drivers/DLLs
• Global technical support (24 hours/7 days) drivers.

Hardware Specifications

• 32 bit, 3U Compact PCI interface card, surface-mount technology PCI Card
• 256 Kbytes shared RAM(16 Kbytes host interface window)
• High performance 40 MHz processor with 512 Kbytes RAM, 512 Kbytes Flash
• PCI BIOS configurable interrupt support
• DeviceNet compatible 5-pin DeviceNet connector
• DeviceNet compatible network status bicolor indicator
• Plug and play drivers included
• Compatible with CAN specification 2.0 part A
• Supports CAN data rates up to 1 Mbaud
• Supports all standard DeviceNet data rates: 125, 250, and 500 Kbaud
• Multiple cards can be configured in the same computer
• 500 V optically isolated CAN interface
• Operational temperature: 0 to 50 C
• Storage temperature: -25 to 70C
• Power requirements: +5 V +/- 5% 400mA (typical)
• Connection to non-powered (3 wire) CAN networks with external 12-24 VDC

Other Reference Materials
Web Site: www.mysst.com/cards/devicenet/dn.asp

Affiliations
SST is an acitve member of the ODVA (Open DeviceNet Vendor Association)

Data Sheets

• DeviceNet Diagnostic and Configuration Software
• DeviceNet OPC Server
• Third Party Driver List

Certifications
DeviceNet Conformance Tested

Ordering Information: 5136-DNP-CPCI